ET170-017 1/2-inch White PVC SCHEDULE 40 PLUG
❤ DESIGN: The ET170-017 is designed with a hex head and 1/2-inch MIPT threaded end connector.
❤ USE: The ET170-017’s 1/2-inch MIPT threaded end connector screws into the ET200-XXX series and the ET115-001 air gaps’ 1/2-inch threaded inlet ports when they are not in use. It creates a tight seal to prevent liquid from leaking into or out of the system which the air gaps are connected to.
❤ MATERIAL: The ET170-017 is made of polyvinyl chloride (PVC) material.
The ET170-017 Schedule 40 PVC Plug is a male MIPT threaded plug that closes the end of a pipeline or a location where future additions may be made to the piping system. It screws into place which makes them simple to install or replace. The ET170-017 is used in cold water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications.
The ET170-017 is used to plug the 1/2-inch threaded inlet ports of the ET200-XXX series and the ET115-001 air gaps if not in use. When plugged, the ET170-017 creates a tight seal that prevents leakage of liquid into or out of the system which the air gaps are connected to.
