AG200-X10 Universal Dual Air Gap with Long Body Thread with 1/2-inch MIPT and 5/8-inch OD Inlets and 7/8-inch OD Outlet

❤ FLOW RATE: The AG200-X10’s maximum flow rate is 10 gallons per minute (GPM). The maximum flow rate through this air gap is the highest flow rate above which the air gap will overflow. The air gap is dry on the outside at the maximum flow rate.

❤ INLET PORTS: The AG200-X10 is designed with two inlets that accept standard 5/8-inch inside diameter hoses from a dual dishwasher. The hoses from the dishwasher slide onto the side ports and are secured using stainless worm clamps (not included). The hose should have no kinks, and the water should pass freely. Both sides of the dishwasher can be operational at the same time. This air gap is compatible with all dual dishwashers.

❤ OUTLET PORTS: The drainage side of the air gap connects to a 7/8-inch inside diameter hose, which routes discharge water to the side drain connection on the garbage disposal. This hose is available from Home Depot (search for “PVC Disposal Discharge Hose”). When installing this hose, make sure that there is no sagging or loops. Any sagging creates standing water and restricts the air gap’s proper draining. Secure both ends of the hose with a 1-inch stainless steel worm clamp (not included).

❤ THREADED BODY: The AG200-X10 has a body with a thread that enables air gap mounting through a standard countertop. The countertop thickness can be up to 1-3/4 inches, and no special modifications are required to accommodate this air gap. The body of the air gap is made from extra durable plastic to resist bending or deforming.

❤ MOUNTING NUT: The AG200-X10 has a durable mounting nut that will not strip or become loose. The multi-threaded nut can be tightened without the worry of damaging threads. This configuration provides a simple and reliable installation that prevents leaks and assures trouble-free operation after installing the air gap.

❤ DECORATIVE CAP: The AG200-X10 offers a variety of decorative cap finishes designed to complement your kitchen sink faucet. If you have the AG200-010 with the standard polished chrome cap, individual decorative caps are also available. Choose a cap or air gap variation that best matches the color of your faucet. Please note, caps are sold separately.

SKU: AG200-010 Categories: , ,

The AG200-X10 is available in different decorative cap finishes and is available for direct purchase on Amazon.
Click on the product image below to view and order:

A dishwasher air gap is critical to maintaining a safe water supply. It prevents contaminants in the sink from flowing into the dishwasher and is required by code in most states.

The AG200-X10 universal dual air gap is made for double-drawer dishwashers. It is designed with two inlets and one outlet that connects to a 7/8-inch inside diameter hose, which routes discharge water to the side drain connection of the garbage disposal or a drain line adapter. The inlets accept standard 5/8-inch inside diameter hoses from a dual dishwasher or single dishwasher and water softener. One inlet has 1/2-inch threads that accommodate a 1/2-inch MIPT threaded adapter with a 5/8-inch barb.

The AG200-X10’s maximum flow rate is 10 gallons per minute (GPM). The maximum flow rate through this air gap is the highest flow rate above which the air gap will overflow. The air gap is dry on the outside at the maximum flow rate.

This air gap is easy to install, easy to use, and easy to maintain. The AG200-X10 air gap is listed by UPC® and tested for compliance with IPC® and NSF® standards.

Optional accessories are available for the AG200-X10:

air gap fitting

AG170-031

RO KIT FOR AG200-010

ET170-002

1/2″ MIPT x 3/8″ QUICK CONNECT

ET170-003

1/2″ MIPT x 1/2″ QUICK CONNECT

ET170-004

1/2″ MIPT x 5/8″ QUICK CONNECT

air gap fitting

ET170-005

1/2″ MIPT x 1/2″ BARB INSERT STRAIGHT

air gap fitting

ET170-006

1/2″ MIPT x 1/2″ BARB INSERT 90° ELBOW

air gap fitting

ET170-008

1/2″ MIPT x 5/8″ BARB INSERT 90° ELBOW

air gap fitting

ET170-017

1/2″ MIPT x 5/8″ BARB INSERT 90° ELBOW