ET112-004 Drain Line Adapter (DLA) with 7/8-inch Barb Fitting for Dishwashers or Water Softeners
❤ SIMPLE INSTALLATION: The ET112-004 connects discharge 7/8-inch tubing from a dishwasher or water softener to the drain. Its 3-way repair tee directly connects to the sink drainpipe. Its drain line adapter with a 7/8-inch barb connector accommodates a 7/8-inch ID drain tubing. The ET112-004 resists clogging for lifelong operation. The ET112-004 can be installed vertically or horizontally.
❤ DRAIN LINE CONNECTION: The ET112-004 connects a dishwasher/water softener to the drain. Installing the ET112-004 is simple and does not require drilling into wet pipes. It also comes with all the fittings and instructions needed for installation.
❤ QUIET OPERATION: The ET112-004 minimizes water draining noise.
❤ CERTIFICATION: The ET112-004 is legal to install in any state. It is UPC® (Uniform Plumbing Code) Listed, IPC® (International Plumbing Code), NSF® (National Sanitation Foundation) tested, and ASTM F 409 compliant. These certifications ensure that ET112-004 is safe to use. The testing is conducted for every manufactured lot to ensure consistent performance.
The ET112-004 is a drain line adapter for dishwashers or water softeners used with multi-compartment or single-compartment sinks without garbage disposal. It is designed to connect discharge 7/8-inch tubing from a dishwasher/water softener to the drain. The ET112-004 is connected to the sink drainpipe to receive the reject water from the dishwasher/water softener. The installation provides a reliable and trouble-free connection of the 7/8-inch discharge water tubing to the drain line.
The ET112-004 is designed for residential and commercial use. The ET112-004 is the preferred way to connect a dishwasher/water softener to the drain line. It minimizes water-draining noise and is designed to be installed downstream of an approved air gap. The ET112-004 provides a safe and effective way to comply with all local plumbing codes.
The ET112-004 drain adapter is listed by UPC and tested for compliance with IPC and NSF standards.
